Fake Flame™
The FF-2 Fake Flame™ system is designed to give a realistic simulation of fire when the use of real flame is not possible due to either health & safety concerns or budgetary constraints. For indoor use, in low-light conditions, the FF-2 can be cued by contact closure or run continually. The flame colour can be adjusted by the operator/programmer via the RGB LED illumination. The flame height is adjusted, manually, and then set and cannot be adjusted remotely.
The FF-2 uses steam as the media which should be dry (no condensate) and at 5 Bar. It is recommended that the steam boiler (not supplied) is rated at 3 – 5kW per meter of Fake Flame™ employed.
The SB-6 is also available in special configurations (to order), including; all stainless-steel construction, specialist colours, 204V 40A 1-ph and with optional twin 9kW heater blocks (18kW total).
Fake Flame™ specs:
Power Requirements: 240V 50Hz 1500W
Control: DMX512 & 24v DC
Dimensions: 1000mm x 350mm x 300mm
Product Weight: 25kg
Flame height: Adjustable (100mm – 1000mm)
Flame colour: Adjustable (12 x 3W RGB LEDs) DMX
Steam supply: Dry steam @ 5Bar 5KG/hr min.
Effect Size: 0.5 – 1.5 metres (although almost any size can be made to order.)
Safe operating conditions: Dry 10-30 C ambient
Condensate drain: 40-50 C @ 1-1.5 kg/hr
Applications: Theme parks, 4D cinema, theatre, public spaces
